HMR-302008-FS-10.6R/450-650T

LENGTH: 3.000"+.000"/-.005"
WIDTH: 2.080"+.000"/-.005"
THICKNESS: 0.082"+/-.005"
CORNER BEVELS: 0.780"+/-.005" X 52.4deg, 4 PLACES.
EDGE BEVEL: 0.010"+/-.005" X 45deg, ALL EDGES.
PARALLELISM: 3 ARC MINUTES MAXIMUM.
SURFACE ACCURACY: 2 FRINGES MAXIMUM, 2 FACES.
SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
CLEAR APERTURE: CENTRAL AREA DEFINED BY 3.00" X
2.080" OVAL (SEE DRAWING), 2 FACES
MATERIAL TYPE/QUALITY: FUSED SILICA, MIRROR GRADE.
COATING: SEE NOTE 6 OF DRAWING SCD2587 Rev.A.
MARKING: ARROW ON EDGE POINTING TOWARDS FRONT
SURFACE COATING.

TM-0404-S-PS(DBMR)

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 0.375"+.000"/-.005"
THICKNESS: 0.040"+.000"/-.005"
PARALLELISM: 0.0005" MAXIMUM T.I.R.
FLATNESS: PWR: 2 FRINGES MAX.|IRREG: 1 FRINGE MAX.
SURFACE QUALITY: 40-20 SCRATCH-DIG, 1 FACE.
FINE GROUND, 1 FACE.
CLEAR APERTURE: CENTRAL 0.335"MINIMUM DIAMETER.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
MATERIAL: SILICON, SINGLE CRYSTAL, MIRROR GRADE.
COATING: PROTECTED SILVER COAT FOR 99.5% MINIMUM
REFLECTANCE AT 10.6 MICRONS AND ALSO
95.0% MINIMUM REFLECTANCE AT 0.650
MICRONS, WITH A 45deg INCIDENCE ANGLE
APPLIED TO POLISHED FACE.
TOTAL ABSORPTION: 0.20% MAXIMUM.

TM-0501-X-PS(DBMR)

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 0.500"+.000"/-.005"
THICKNESS: 0.010"+/-.001"
PARALLELISM: NOT SPECIFIED
FLATNESS: 2 FRINGES MAXIMUM, POLISHED FACE.
SURFACE QUALITY: 40-20 SCRATCH-DIG, 1 FACE.
FINE GROUND, 1 FACE.
CLEAR APERTURE: CENTRAL 0.480"MINIMUM DIAMETER.
EDGE BEVEL: NONE, NOT REQUIRED
MATERIAL: SAPPHIRE, MIRROR GRADE.
COATING: PROTECTED SILVER COAT FOR 99.5% MINIMUM
REFLECTANCE AT 10.6 MICRONS AND ALSO
95.0% MINIMUM REFLECTANCE AT 0.633
MICRONS, WITH A 45deg INCIDENCE ANGLE
APPLIED TO POLISHED FACE.
TOTAL ABSORPTION: 0.20% MAXIMUM.

TM-0512-S-ES/DBMR

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 0.500"+.000"/-.005"
THICKNESS: 0.120"+/-.005"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1/40 WAVE MAXIMUM @10.6um, POLISHED FACE
SURFACE QUALITY: 20-10 SCRATCH-DIG, POLISHED FACE.
FINE GROUND BACK FACE
MATERIAL TYPE/QUALITY: SILICON, SINGLE CRYSTAL,
MIRROR GRADE.
COATING: ENHANCED SILVER COAT FOR 99.6% MINIMUM
REFLECTANCE AT 10.6 MICRONS AND ALSO
85.0% MINIMUM REFLECTANCE AT 0.633
MICRONS, BOTH WITH A 45 DEGREE INCIDENCE
ANGLE, APPLIED TO POLISHED FACE.

TM-0513-FS-Y

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 0.500"+.000"/-.005"
THICKNESS: 0.125"+/-.005"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
SURFACE FINISH: 20-10 SCRATCH/DIG PER MIL-O-13830,
2 FACES.
EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
MATERIAL: FUSED SILICA, STANDARD OPTICAL GRADE.
COATING: SURFACE "1": COATED FOR > 99.7% AVERAGE
REFLECTANCE @ 1.064um WITH A 45 DEGREE
INCIDENCE ANGLE.
SURFACE "2": NONE, UNCOATED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
SURFACE "1".

TM-0525-FS-MR-Y

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 0.500"+.000"/-.005"
THICKNESS: 0.250"+/-.010"
PARALLELISM: 10 ARC SECONDS MAXIMUM.
FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
SURFACE FINISH: 20-10 SCRATCH/DIG PER MIL-O-13830,
2 FACES.
EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
MATERIAL: FUSED SILICA, STANDARD OPTICAL GRADE.
COATING: MIRROR COATED FOR > 99.7% AVERAGE
REFLECTANCE AT 1.06 MICRONS WITH A
45deg INCIDENCE ANGLE, APPLIED TO
1 FACE ONLY.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
COATED SURFACE.

TM-0606-S-DBMR

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 0.625"+.000"/-.005"
THICKNESS: 0.0625"+/-.0025"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1/40 WAVE MAXIMUM AT 10.6 MICRONS.
SURFACE QUALITY: 20-10 SCRATCH-DIG, 1 FACE.
FINE GROUND, 1 FACE.
CLEAR APERTURE: CENTRAL 0.500"MINIMUM DIAMETER.
EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
MATERIAL: SILICON, SINGLE CRYSTAL, MIRROR GRADE.
COATING: DUAL BAND MIRROR COAT FOR 99.7% MINIMUM
REFLECTANCE AT 10.6 MICRONS AND ALSO
85.0% MINIMUM REFLECTANCE AT 0.633
MICRONS, WITH A 45deg INCIDENCE ANGLE
APPLIED TO POLISHED FACE.

TM-0616-S-ES/DBMR

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 0.625"+.000"/-.005"
THICKNESS: 0.062"+/-.005"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1/40 WAVE MAXIMUM @10.6um, POLISHED FACE
SURFACE QUALITY: 20-10 SCRATCH-DIG, POLISHED FACE.
FINE GROUND BACK FACE
MATERIAL TYPE/QUALITY: SILICON, SINGLE CRYSTAL,
MIRROR GRADE.
COATING: ENHANCED SILVER COAT FOR 99.6% MINIMUM
REFLECTANCE AT 10.6 MICRONS AND ALSO
85.0% MINIMUM REFLECTANCE AT 0.633
MICRONS, BOTH WITH A 45 DEGREE INCIDENCE
ANGLE, APPLIED TO POLISHED FACE.

TM-0616-S-ES/DBMR

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 0.625"+.000"/-.005"
THICKNESS: 0.160"+/-.005"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1/40 WAVE MAXIMUM @10.6um, POLISHED FACE
SURFACE QUALITY: 20-10 SCRATCH-DIG, POLISHED FACE.
FINE GROUND BACK FACE
MATERIAL TYPE/QUALITY: SILICON, SINGLE CRYSTAL,
MIRROR GRADE.
COATING: ENHANCED SILVER COAT FOR 99.6% MINIMUM
REFLECTANCE AT 10.6 MICRONS AND ALSO
85.0% MINIMUM REFLECTANCE AT 0.633
MICRONS, BOTH WITH A 45 DEGREE INCIDENCE
ANGLE, APPLIED TO POLISHED FACE.

TM-1012-BK-DBMR(355/532)

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.000"+.000"/-.005"
THICKNESS: 0.120"+/-.010"
PARALLELISM: 10 ARC SECONDS MAXIMUM.
FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
SURFACE FINISH: 10-5 SCRATCH/DIG PER MIL-O-13830,
2 FACES.
EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
MATERIAL: BK-7 GLASS, GRADE A, FINE ANNEALED
COATING: SURFACE "1": COATED FOR >99.0% AVERAGE
REFLECTANCE @ 0.355um AND >90.0% AVERAGE
REFLECTANCE @ 0.532um, WITH A 45 DEGREE
INCIDENCE ANGLE.
SURFACE "2": NONE, UNCOATED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
SURFACE "1".

TM-1012-S-ES/DBMR

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.000"+.000"/-.005"
THICKNESS: 0.120"+/-.005"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1/40 WAVE MAXIMUM @10.6um, POLISHED FACE
SURFACE QUALITY: 20-10 SCRATCH-DIG, POLISHED FACE.
FINE GROUND BACK FACE
MATERIAL TYPE/QUALITY: SILICON, SINGLE CRYSTAL,
MIRROR GRADE.
COATING: ENHANCED SILVER COAT FOR 99.6% MINIMUM
REFLECTANCE AT 10.6 MICRONS AND ALSO
85.0% MINIMUM REFLECTANCE AT 0.633
MICRONS, BOTH WITH A 45 DEGREE INCIDENCE
ANGLE, APPLIED TO POLISHED FACE.

TM-1025-BK-DBMR(CV/HeNe)

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.000"+.000"/-.005"
THICKNESS: 0.120"+/-.010"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1/2 WAVE MAXIMUM AT 0.633u, 20-10 FACE.
SURFACE QUALITY: 20-10 SCRATCH-DIG, 1/2 WAVE FACE
BACK FACE POLISHED 80-50.
MATERIAL: BK-7 GLASS, GRADE A, FINE ANNEALED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
COATED FACE.
COATING: DUAL BAND MAXIMUM REFLECTIVE COATING FOR
> 99.50% REFLECTANCE AT 510nm AND 578nm,
AND ALSO > 90.0% REFLECTANCE AT 633nm,
ALL WITH A INCIDENCE ANGLE OF 45 DEGREES,
APPLIED TO 1 FACE. (1/2 WAVE FACE).

TM-1112-FS-DBMR(355/532)

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.100"+.000"/-.005"
THICKNESS: 0.120"+/-.010"
PARALLELISM: 10 ARC SECONDS MAXIMUM.
FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
SURFACE FINISH: 10-5 SCRATCH/DIG PER MIL-O-13830,
2 FACES.
EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
MATERIAL: FUSED SILICA, STANDARD OPTICAL GRADE.
COATING: SURFACE "1": COATED FOR >99.0% AVERAGE
REFLECTANCE @ 0.355um AND >90.0% AVERAGE
REFLECTANCE @ 0.532um, WITH A 45 DEGREE
INCIDENCE ANGLE.
SURFACE "2": NONE, UNCOATED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
SURFACE "1".

TM-1112-FS-DBMR(Y/532)

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.100"+.000"/-.005"
THICKNESS: 0.120"+/-.010"
PARALLELISM: 10 ARC SECONDS MAXIMUM.
FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
SURFACE FINISH: 10-5 SCRATCH/DIG PER MIL-O-13830,
2 FACES.
EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
MATERIAL: FUSED SILICA, STANDARD OPTICAL GRADE.
COATING: SURFACE "1": COATED FOR >99.5% AVERAGE
REFLECTANCE @ 1.064um AND >99.0% AVERAGE
REFLECTANCE @ 0.532um, WITH A 45 DEGREE
INCIDENCE ANGLE.
SURFACE "2": NONE, UNCOATED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
SURFACE "1".

TM-1112-FS-MR(532)

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.100"+.000"/-.005"
THICKNESS: 0.120"+/-.010"
PARALLELISM: 10 ARC SECONDS MAXIMUM.
FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
SURFACE FINISH: 10-5 SCRATCH/DIG PER MIL-O-13830,
2 FACES.
EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
MATERIAL: FUSED SILICA, STANDARD OPTICAL GRADE.
COATING: SURFACE "1": COATED FOR >99.7% AVERAGE
REFLECTANCE @ 0.532um, WITH A 45 DEGREE
INCIDENCE ANGLE.
SURFACE "2": NONE, UNCOATED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
SURFACE "1".

TM-1112-S-ES/DBMR

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.100"+.000"/-.005"
THICKNESS: 0.120"+/-.010"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1/40 WAVE FLAT AT 10.6 MICRONS, 1 FACE.
SURFACE FINISH: 20-10 SCRATCH/DIG PER MIL-O-13830,
1 FACE.
FINE GROUND, 1 FACE.
MATERIAL: SILICON, SINGLE CRYSTAL, MIRROR GRADE.
COATING: ENHANCED SILVER COAT FOR 99.6% MINIMUM
REFLECTANCE AT 10.6 MICRONS AND ALSO
85.0% MINIMUM REFLECTANCE AT 0.633
MICRONS, BOTH WITH A 45 DEGREE INCIDENCE
ANGLE, APPLIED TO POLISHED FACE.

TM-1512-FS-MR(532)

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.500"+.000"/-.005"
THICKNESS: 0.120"+/-.010"
PARALLELISM: 10 ARC SECONDS MAXIMUM.
FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
SURFACE FINISH: 10-5 SCRATCH/DIG PER MIL-O-13830,
2 FACES.
EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
MATERIAL: FUSED SILICA, STANDARD OPTICAL GRADE.
COATING: SURFACE "1": COATED FOR >99.7% AVERAGE
REFLECTANCE @ 0.532um, WITH A 45 DEGREE
INCIDENCE ANGLE.
SURFACE "2": NONE, UNCOATED.
MARKING: ARROW ON OD SURFACE POINTING TOWARDS
SURFACE "1".

TM-1514-S-EG

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.500"+.000"/-.005"
THICKNESS: 0.140"+/-.005"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1/40 WAVE MAXIMUM AT 10.6u, 20-10 FACE.
SURFACE QUALITY: 20-10 SCRATCH-DIG, 1/40 WAVE FACE
FINE GROUND BACK FACE
MATERIAL TYPE/QUALITY: SILICON, SINGLE CRYSTAL,
MIRROR GRADE.
COATING: ENHANCED GOLD COAT FOR 99.5% MINIMUM
REFLECTANCE AT 10.6 MICRONS WITH A 45
DEGREE ANGLE OF INCIDENCE, APPLIED TO
1/40 WAVE FLAT FACE.

TM-1516-S-ES/DBMR

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.500"+.000"/-.005"
THICKNESS: 0.160"+/-.005"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1/40 WAVE MAXIMUM @10.6um, POLISHED FACE
SURFACE QUALITY: 20-10 SCRATCH-DIG, POLISHED FACE.
FINE GROUND BACK FACE
MATERIAL TYPE/QUALITY: SILICON, SINGLE CRYSTAL,
MIRROR GRADE.
COATING: ENHANCED SILVER COAT FOR 99.6% MINIMUM
REFLECTANCE AT 10.6 MICRONS AND ALSO
85.0% MINIMUM REFLECTANCE AT 0.633
MICRONS, BOTH WITH A 45 DEGREE INCIDENCE
ANGLE, APPLIED TO POLISHED FACE.

TM-1525-S-ES

CONFIGURATION: DISC, PLANE-PARALLEL
DIAMETER: 1.500"+.000"/-.005"
THICKNESS: 0.250"+/-.010"
PARALLELISM: 3 ARC MINUTES MAXIMUM.
FLATNESS: 1/40 WAVE MAXIMUM AT 10.6u, 20-10 FACE.
SURFACE QUALITY: 20-10 SCRATCH-DIG,1/40 WAVE FACE.
BACK FACE FINE GROUND.
MATERIAL: SILICON, SINGLE CRYSTAL, MIRROR GRADE.
COATING: ENHANCED SILVER COATING FOR 99.6% MINIMUM
REFLECTANCE AT 10.6 MICRONS WITH A 45
DEGREE ANGLE OF INCIDENCE, APPLIED TO
1/40 WAVE FLAT FACE.