TURNING MIRROR

Showing 1–20 of 41 results

    Catalog No. Description QOH Order
    HMR-302008-FS-10.6R/450-650T more info...

    HMR-302008-FS-10.6R/450-650T

    LENGTH: 3.000″+.000″/-.005″
    WIDTH: 2.080″+.000″/-.005″
    THICKNESS: 0.082″+/-.005″
    CORNER BEVELS: 0.780″+/-.005″ X 52.4deg, 4 PLACES.
    EDGE BEVEL: 0.010″+/-.005″ X 45deg, ALL EDGES.
    PARALLELISM: 3 ARC MINUTES MAXIMUM.
    SURFACE ACCURACY: 2 FRINGES MAXIMUM, 2 FACES.
    SURFACE QUALITY: 60-40 PER MIL-PRF-13830, 2 FACES.
    CLEAR APERTURE: CENTRAL AREA DEFINED BY 3.00″ X
    2.080″ OVAL (SEE DRAWING), 2 FACES
    MATERIAL TYPE/QUALITY: FUSED SILICA, MIRROR GRADE.
    COATING: SEE NOTE 6 OF DRAWING SCD2587 Rev.A.
    MARKING: ARROW ON EDGE POINTING TOWARDS FRONT
    SURFACE COATING.

    6Register for Pricing
    TM-0203-S-PS(DBMR) more info...

    TM-0203-S-PS(DBMR)

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 0.250″+.000″/-.005″
    THICKNESS: 0.035″+/-.005″
    PARALLELISM: NOT SPECIFIED
    FLATNESS: PWR: 2 FRINGES MAX.|IRREG: 1 FRINGE MAX.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 1 FACE.
    FINE GROUND, 1 FACE.
    CLEAR APERTURE: CENTRAL 0.230″MINIMUM DIAMETER.
    EDGE BEVEL: NONE, SHARP EDGE REQUIRED.
    MATERIAL: SILICON, SINGLE CRYSTAL, MIRROR GRADE.
    COATING: PROTECTED SILVER COAT FOR 99.5% MINIMUM
    REFLECTANCE AT 10.6 MICRONS AND ALSO
    95.0% MINIMUM REFLECTANCE AT 0.633
    MICRONS, WITH A 45deg INCIDENCE ANGLE
    APPLIED TO POLISHED FACE.
    TOTAL ABSORPTION: 0.20% MAXIMUM.

    2Register for Pricing
    TM-0404-S-PS(DBMR) more info...

    TM-0404-S-PS(DBMR)

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 0.375″+.000″/-.005″
    THICKNESS: 0.040″+.000″/-.005″
    PARALLELISM: 0.0005″ MAXIMUM T.I.R.
    FLATNESS: PWR: 2 FRINGES MAX.|IRREG: 1 FRINGE MAX.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 1 FACE.
    FINE GROUND, 1 FACE.
    CLEAR APERTURE: CENTRAL 0.335″MINIMUM DIAMETER.
    EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
    MATERIAL: SILICON, SINGLE CRYSTAL, MIRROR GRADE.
    COATING: PROTECTED SILVER COAT FOR 99.5% MINIMUM
    REFLECTANCE AT 10.6 MICRONS AND ALSO
    95.0% MINIMUM REFLECTANCE AT 0.650
    MICRONS, WITH A 45deg INCIDENCE ANGLE
    APPLIED TO POLISHED FACE.
    TOTAL ABSORPTION: 0.20% MAXIMUM.

    8Register for Pricing
    TM-0501-X-PS(DBMR) more info...

    TM-0501-X-PS(DBMR)

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 0.500″+.000″/-.005″
    THICKNESS: 0.010″+/-.001″
    PARALLELISM: NOT SPECIFIED
    FLATNESS: 2 FRINGES MAXIMUM, POLISHED FACE.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 1 FACE.
    FINE GROUND, 1 FACE.
    CLEAR APERTURE: CENTRAL 0.480″MINIMUM DIAMETER.
    EDGE BEVEL: NONE, NOT REQUIRED
    MATERIAL: SAPPHIRE, MIRROR GRADE.
    COATING: PROTECTED SILVER COAT FOR 99.5% MINIMUM
    REFLECTANCE AT 10.6 MICRONS AND ALSO
    95.0% MINIMUM REFLECTANCE AT 0.633
    MICRONS, WITH A 45deg INCIDENCE ANGLE
    APPLIED TO POLISHED FACE.
    TOTAL ABSORPTION: 0.20% MAXIMUM.

    24Register for Pricing
    TM-0512-S-ES/DBMR more info...

    TM-0512-S-ES/DBMR

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 0.500″+.000″/-.005″
    THICKNESS: 0.120″+/-.005″
    PARALLELISM: 3 ARC MINUTES MAXIMUM.
    FLATNESS: 1/40 WAVE MAXIMUM @10.6um, POLISHED FACE
    SURFACE QUALITY: 20-10 SCRATCH-DIG, POLISHED FACE.
    FINE GROUND BACK FACE
    MATERIAL TYPE/QUALITY: SILICON, SINGLE CRYSTAL,
    MIRROR GRADE.
    COATING: ENHANCED SILVER COAT FOR 99.6% MINIMUM
    REFLECTANCE AT 10.6 MICRONS AND ALSO
    85.0% MINIMUM REFLECTANCE AT 0.633
    MICRONS, BOTH WITH A 45 DEGREE INCIDENCE
    ANGLE, APPLIED TO POLISHED FACE.

    58Register for Pricing
    TM-0513-FS-Y more info...

    TM-0513-FS-Y

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 0.500″+.000″/-.005″
    THICKNESS: 0.125″+/-.005″
    PARALLELISM: 3 ARC MINUTES MAXIMUM.
    FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
    SURFACE FINISH: 20-10 SCRATCH/DIG PER MIL-O-13830,
    2 FACES.
    EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
    MATERIAL: FUSED SILICA, STANDARD OPTICAL GRADE.
    COATING: SURFACE “1”: COATED FOR > 99.7% AVERAGE
    REFLECTANCE @ 1.064um WITH A 45 DEGREE
    INCIDENCE ANGLE.
    SURFACE “2”: NONE, UNCOATED.
    MARKING: ARROW ON OD SURFACE POINTING TOWARDS
    SURFACE “1”.

    182Register for Pricing
    TM-0525-FS-MR-Y more info...

    TM-0525-FS-MR-Y

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 0.500″+.000″/-.005″
    THICKNESS: 0.250″+/-.010″
    PARALLELISM: 10 ARC SECONDS MAXIMUM.
    FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
    SURFACE FINISH: 20-10 SCRATCH/DIG PER MIL-O-13830,
    2 FACES.
    EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
    MATERIAL: FUSED SILICA, STANDARD OPTICAL GRADE.
    COATING: MIRROR COATED FOR > 99.7% AVERAGE
    REFLECTANCE AT 1.06 MICRONS WITH A
    45deg INCIDENCE ANGLE, APPLIED TO
    1 FACE ONLY.
    MARKING: ARROW ON OD SURFACE POINTING TOWARDS
    COATED SURFACE.

    8Register for Pricing
    TM-0606-S-DBMR more info...

    TM-0606-S-DBMR

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 0.625″+.000″/-.005″
    THICKNESS: 0.0625″+/-.0025″
    PARALLELISM: 3 ARC MINUTES MAXIMUM.
    FLATNESS: 1/40 WAVE MAXIMUM AT 10.6 MICRONS.
    SURFACE QUALITY: 20-10 SCRATCH-DIG, 1 FACE.
    FINE GROUND, 1 FACE.
    CLEAR APERTURE: CENTRAL 0.500″MINIMUM DIAMETER.
    EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
    MATERIAL: SILICON, SINGLE CRYSTAL, MIRROR GRADE.
    COATING: DUAL BAND MIRROR COAT FOR 99.7% MINIMUM
    REFLECTANCE AT 10.6 MICRONS AND ALSO
    85.0% MINIMUM REFLECTANCE AT 0.633
    MICRONS, WITH A 45deg INCIDENCE ANGLE
    APPLIED TO POLISHED FACE.

    10Register for Pricing
    TM-0616-S-ES/DBMR more info...

    TM-0616-S-ES/DBMR

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 0.625″+.000″/-.005″
    THICKNESS: 0.062″+/-.005″
    PARALLELISM: 3 ARC MINUTES MAXIMUM.
    FLATNESS: 1/40 WAVE MAXIMUM @10.6um, POLISHED FACE
    SURFACE QUALITY: 20-10 SCRATCH-DIG, POLISHED FACE.
    FINE GROUND BACK FACE
    MATERIAL TYPE/QUALITY: SILICON, SINGLE CRYSTAL,
    MIRROR GRADE.
    COATING: ENHANCED SILVER COAT FOR 99.6% MINIMUM
    REFLECTANCE AT 10.6 MICRONS AND ALSO
    85.0% MINIMUM REFLECTANCE AT 0.633
    MICRONS, BOTH WITH A 45 DEGREE INCIDENCE
    ANGLE, APPLIED TO POLISHED FACE.

    7Register for Pricing
    TM-0616-S-ES/DBMR more info...

    TM-0616-S-ES/DBMR

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 0.625″+.000″/-.005″
    THICKNESS: 0.160″+/-.005″
    PARALLELISM: 3 ARC MINUTES MAXIMUM.
    FLATNESS: 1/40 WAVE MAXIMUM @10.6um, POLISHED FACE
    SURFACE QUALITY: 20-10 SCRATCH-DIG, POLISHED FACE.
    FINE GROUND BACK FACE
    MATERIAL TYPE/QUALITY: SILICON, SINGLE CRYSTAL,
    MIRROR GRADE.
    COATING: ENHANCED SILVER COAT FOR 99.6% MINIMUM
    REFLECTANCE AT 10.6 MICRONS AND ALSO
    85.0% MINIMUM REFLECTANCE AT 0.633
    MICRONS, BOTH WITH A 45 DEGREE INCIDENCE
    ANGLE, APPLIED TO POLISHED FACE.

    59Register for Pricing
    TM-0725-S-DBMR more info...

    TM-0725-S-DBMR

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 0.750″+.000″/-.005″
    THICKNESS: 0.250″+/-.010″
    PARALLELISM: 3 ARC MINUTES MAXIMUM.
    FLATNESS: 1/40 WAVE MAXIMUM AT 10.6 MICRONS.
    SURFACE QUALITY: 20-10 SCRATCH-DIG, 1 FACE.
    FINE GROUND, 1 FACE.
    CLEAR APERTURE: CENTRAL 0.675″MINIMUM DIAMETER.
    EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
    MATERIAL: SILICON, SINGLE CRYSTAL, MIRROR GRADE.
    COATING: DUAL BAND MIRROR COAT FOR 99.7% MINIMUM
    REFLECTANCE AT 10.6 MICRONS AND ALSO
    85.0% MINIMUM REFLECTANCE AT 0.633
    MICRONS, WITH A 45deg INCIDENCE ANGLE
    APPLIED TO POLISHED FACE.

    5Register for Pricing
    TM-1012-BK-DBMR(355/532) more info...

    TM-1012-BK-DBMR(355/532)

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 1.000″+.000″/-.005″
    THICKNESS: 0.120″+/-.010″
    PARALLELISM: 10 ARC SECONDS MAXIMUM.
    FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
    SURFACE FINISH: 10-5 SCRATCH/DIG PER MIL-O-13830,
    2 FACES.
    EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
    MATERIAL: BK-7 GLASS, GRADE A, FINE ANNEALED
    COATING: SURFACE “1”: COATED FOR >99.0% AVERAGE
    REFLECTANCE @ 0.355um AND >90.0% AVERAGE
    REFLECTANCE @ 0.532um, WITH A 45 DEGREE
    INCIDENCE ANGLE.
    SURFACE “2”: NONE, UNCOATED.
    MARKING: ARROW ON OD SURFACE POINTING TOWARDS
    SURFACE “1”.

    2Register for Pricing
    TM-1012-S-ES/DBMR more info...

    TM-1012-S-ES/DBMR

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 1.000″+.000″/-.005″
    THICKNESS: 0.120″+/-.005″
    PARALLELISM: 3 ARC MINUTES MAXIMUM.
    FLATNESS: 1/40 WAVE MAXIMUM @10.6um, POLISHED FACE
    SURFACE QUALITY: 20-10 SCRATCH-DIG, POLISHED FACE.
    FINE GROUND BACK FACE
    MATERIAL TYPE/QUALITY: SILICON, SINGLE CRYSTAL,
    MIRROR GRADE.
    COATING: ENHANCED SILVER COAT FOR 99.6% MINIMUM
    REFLECTANCE AT 10.6 MICRONS AND ALSO
    85.0% MINIMUM REFLECTANCE AT 0.633
    MICRONS, BOTH WITH A 45 DEGREE INCIDENCE
    ANGLE, APPLIED TO POLISHED FACE.

    161Register for Pricing
    TM-1025-BK-DBMR(CV/HeNe) more info...

    TM-1025-BK-DBMR(CV/HeNe)

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 1.000″+.000″/-.005″
    THICKNESS: 0.120″+/-.010″
    PARALLELISM: 3 ARC MINUTES MAXIMUM.
    FLATNESS: 1/2 WAVE MAXIMUM AT 0.633u, 20-10 FACE.
    SURFACE QUALITY: 20-10 SCRATCH-DIG, 1/2 WAVE FACE
    BACK FACE POLISHED 80-50.
    MATERIAL: BK-7 GLASS, GRADE A, FINE ANNEALED.
    MARKING: ARROW ON OD SURFACE POINTING TOWARDS
    COATED FACE.
    COATING: DUAL BAND MAXIMUM REFLECTIVE COATING FOR
    > 99.50% REFLECTANCE AT 510nm AND 578nm,
    AND ALSO > 90.0% REFLECTANCE AT 633nm,
    ALL WITH A INCIDENCE ANGLE OF 45 DEGREES,
    APPLIED TO 1 FACE. (1/2 WAVE FACE).

    22Register for Pricing
    TM-1112-FS-DBMR(355/532) more info...

    TM-1112-FS-DBMR(355/532)

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 1.100″+.000″/-.005″
    THICKNESS: 0.120″+/-.010″
    PARALLELISM: 10 ARC SECONDS MAXIMUM.
    FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
    SURFACE FINISH: 10-5 SCRATCH/DIG PER MIL-O-13830,
    2 FACES.
    EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
    MATERIAL: FUSED SILICA, STANDARD OPTICAL GRADE.
    COATING: SURFACE “1”: COATED FOR >99.0% AVERAGE
    REFLECTANCE @ 0.355um AND >90.0% AVERAGE
    REFLECTANCE @ 0.532um, WITH A 45 DEGREE
    INCIDENCE ANGLE.
    SURFACE “2”: NONE, UNCOATED.
    MARKING: ARROW ON OD SURFACE POINTING TOWARDS
    SURFACE “1”.

    22Register for Pricing
    TM-1112-FS-DBMR(Y/532) more info...

    TM-1112-FS-DBMR(Y/532)

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 1.100″+.000″/-.005″
    THICKNESS: 0.120″+/-.010″
    PARALLELISM: 10 ARC SECONDS MAXIMUM.
    FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
    SURFACE FINISH: 10-5 SCRATCH/DIG PER MIL-O-13830,
    2 FACES.
    EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
    MATERIAL: FUSED SILICA, STANDARD OPTICAL GRADE.
    COATING: SURFACE “1”: COATED FOR >99.5% AVERAGE
    REFLECTANCE @ 1.064um AND >99.0% AVERAGE
    REFLECTANCE @ 0.532um, WITH A 45 DEGREE
    INCIDENCE ANGLE.
    SURFACE “2”: NONE, UNCOATED.
    MARKING: ARROW ON OD SURFACE POINTING TOWARDS
    SURFACE “1”.

    2Register for Pricing
    TM-1112-FS-MR(532) more info...

    TM-1112-FS-MR(532)

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 1.100″+.000″/-.005″
    THICKNESS: 0.120″+/-.010″
    PARALLELISM: 10 ARC SECONDS MAXIMUM.
    FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
    SURFACE FINISH: 10-5 SCRATCH/DIG PER MIL-O-13830,
    2 FACES.
    EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
    MATERIAL: FUSED SILICA, STANDARD OPTICAL GRADE.
    COATING: SURFACE “1”: COATED FOR >99.7% AVERAGE
    REFLECTANCE @ 0.532um, WITH A 45 DEGREE
    INCIDENCE ANGLE.
    SURFACE “2”: NONE, UNCOATED.
    MARKING: ARROW ON OD SURFACE POINTING TOWARDS
    SURFACE “1”.

    51Register for Pricing
    TM-1112-S-ES/DBMR more info...

    TM-1112-S-ES/DBMR

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 1.100″+.000″/-.005″
    THICKNESS: 0.120″+/-.010″
    PARALLELISM: 3 ARC MINUTES MAXIMUM.
    FLATNESS: 1/40 WAVE FLAT AT 10.6 MICRONS, 1 FACE.
    SURFACE FINISH: 20-10 SCRATCH/DIG PER MIL-O-13830,
    1 FACE.
    FINE GROUND, 1 FACE.
    MATERIAL: SILICON, SINGLE CRYSTAL, MIRROR GRADE.
    COATING: ENHANCED SILVER COAT FOR 99.6% MINIMUM
    REFLECTANCE AT 10.6 MICRONS AND ALSO
    85.0% MINIMUM REFLECTANCE AT 0.633
    MICRONS, BOTH WITH A 45 DEGREE INCIDENCE
    ANGLE, APPLIED TO POLISHED FACE.

    4Register for Pricing
    TM-1512-FS-MR(532) more info...

    TM-1512-FS-MR(532)

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 1.500″+.000″/-.005″
    THICKNESS: 0.120″+/-.010″
    PARALLELISM: 10 ARC SECONDS MAXIMUM.
    FLATNESS: 1/4 WAVE MAXIMUM AT 0.633u, 2 FACES.
    SURFACE FINISH: 10-5 SCRATCH/DIG PER MIL-O-13830,
    2 FACES.
    EDGE BEVEL: 0.25mm NOMINAL X 45deg, 2 PLACES.
    MATERIAL: FUSED SILICA, STANDARD OPTICAL GRADE.
    COATING: SURFACE “1”: COATED FOR >99.7% AVERAGE
    REFLECTANCE @ 0.532um, WITH A 45 DEGREE
    INCIDENCE ANGLE.
    SURFACE “2”: NONE, UNCOATED.
    MARKING: ARROW ON OD SURFACE POINTING TOWARDS
    SURFACE “1”.

    4Register for Pricing
    TM-1512-S-ES more info...

    TM-1512-S-ES

    CONFIGURATION: DISC, PLANE-PARALLEL
    DIAMETER: 1.500″+.000″/-.005″
    THICKNESS: 0.120″+/-.010″
    PARALLELISM: 3 ARC MINUTES MAXIMUM.
    FLATNESS: 1/40 WAVE MAXIMUM AT 10.6u, 20-10 FACE.
    SURFACE QUALITY: 20-10 SCRATCH-DIG,1/40 WAVE FACE.
    BACK FACE FINE GROUND.
    MATERIAL: SILICON, SINGLE CRYSTAL, MIRROR GRADE.
    COATING: ENHANCED SILVER COATING FOR 99.6% MINIMUM
    REFLECTANCE AT 10.6 MICRONS WITH A 45
    DEGREE ANGLE OF INCIDENCE, APPLIED TO
    1/40 WAVE FLAT FACE.

    4Register for Pricing