LENS PL/CX

Showing 1–20 of 81 results

    Catalog No. Description QOH Order
    LX-0340-Z-ET2.0-UC more info...

    LX-0340-Z-ET2.0-UC

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 0.250″+.000″/-.005″
    EDGE THICKNESS: 0.080″+/-.010″
    WEDGE ERROR: 0.0003″ MAXIMUM T.I.R.
    FOCAL LENGTH: 4.000″ +/- 0.50%
    FLATNESS (PLANO FACE): 1/40 WAVE MAXIMUM AT 10.6u.
    SURFACE ACCURACY (CONVEX FACE): 1/40 WAVE MAXIMUM
    @ 10.6u.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE.
    COATING: NONE, UNCOATED SUBSTRATE.

    12Register for Pricing
    LX-0510-Z-BBAR(3-12) more info...

    LX-0510-Z-BBAR(3-12)

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 0.500″+.000″/-.005″
    EDGE THICKNESS: 0.060″+/-.010″
    WEDGE ERROR: 0.0005″ MAXIMUM T.I.R.
    FOCAL LENGTH: 1.000″ +/- 1.0%
    FLATNESS (PLANO FACE): 1/40 WAVE MAXIMUM AT 10.6u.
    SURFACE ACCURACY (CONVEX FACE): 1/40 WAVE MAXIMUM
    @ 10.6u.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE.
    COATING: BROADBAND ANTIREFLECTIVE COAT 2 FACES FOR
    95.0% MINIMUM AVERAGE TRANSMISSION OVER
    THE RANGE OF 3.0 to 12.0 MICRONS WITH A
    NORMAL INCIDENCE ANGLE.

    4Register for Pricing
    LX-0510-Z-DBAR more info...

    LX-0510-Z-DBAR

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 0.500″+.000″/-.005″
    EDGE THICKNESS: 0.060″+/-.010″
    WEDGE ERROR: 0.0005″ MAXIMUM T.I.R.
    FOCAL LENGTH: 1.000″ +/- 1.0%
    FLATNESS (PLANO FACE): 1/40 WAVE MAXIMUM AT 10.6u.
    SURFACE ACCURACY (CONVEX FACE): 1/40 WAVE MAXIMUM
    @ 10.6u.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE.
    COATING: DUAL-BAND ANTIREFLECTIVE COAT 2 FACES FOR
    0.25% MAXIMUM REFLECTANCE PER SURFACE AT
    10.6 MICRONS WITH A NORMAL INCIDENCE
    ANGLE, ALSO 80.0% MINIMUM TRANSMISSION
    AT 633 NANOMETERS WITH A NORMAL INCIDENCE
    ANGLE.
    ABSORPTION: 0.30% MAXIMUM (TOTAL)

    77Register for Pricing
    LX-0525-Z-ET1.5-DBAR more info...

    LX-0525-Z-ET1.5-DBAR

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 0.500″+.000″/-.005″
    EDGE THICKNESS: 0.060″+/-.005″
    WEDGE ERROR: 0.0005″ MAXIMUM T.I.R.
    SURFACE ACCURACY: 1/40 WAVE @ 10.6um, 2 FACES.
    SURFACE QUALITY: 40-20 PER MIL-PRF-13830, 2 FACES.
    FOCAL LENGTH: 2.500″+/- 0.5%
    MATERIAL TYPE/QUALITY: ZINC SELENIDE, LASER GRADE.
    COATING: DUAL-BAND ANTIREFLECTIVE COATED 2 FACES
    FOR 0.50% MAXIMUM REFLECTANCE PER SURFACE
    AT 10.6 MICRONS AND ALSO 80.0% MINIMUM
    TRANSMISSION AT 0.633 MICRONS WITH A
    NORMAL INCIDENCE ANGLE, APPLIED TO BOTH
    FACES.

    1Register for Pricing
    LX-0530-Z-DBAR more info...

    LX-0530-Z-DBAR

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 0.500″+.000″/-.005″
    EDGE THICKNESS: 0.060″+/-.010″
    WEDGE ERROR: 0.0005″ MAXIMUM T.I.R.
    FOCAL LENGTH: 3.000″ +/- 1.0%
    FLATNESS (PLANO FACE): 1/40 WAVE MAXIMUM AT 10.6u.
    SURFACE ACCURACY (CONVEX FACE): 1/40 WAVE MAXIMUM
    @ 10.6u.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE.
    COATING: DUAL-BAND ANTIREFLECTIVE COATING FOR
    0.50% MAXIMUM REFLECTANCE PER SURFACE AT
    10.6 MICRONS AND ALSO 80.0% TRANSMISSION
    AT 0.633 MICRONS WITH A NORMAL INCIDENCE
    ANGLE, APPLIED TO 2 FACES.

    6Register for Pricing
    LX-0535-Z-ET2.0 more info...

    LX-0535-Z-ET2.0

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 0.500″+.000″/-.005″
    EDGE THICKNESS: 0.080″+/-.005″
    WEDGE ERROR: 0.0005″ MAXIMUM T.I.R.
    SURFACE ACCURACY: 1/40 WAVE @ 10.6u, 2 FACES.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    FOCAL LENGTH: 3.500″ +/- 0.5%
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE.
    COATING: ANTIREFLECTIVE COATING FOR 0.50% MAXIMUM
    REFLECTANCE PER SURFACE AT 10.6 MICRONS
    WITH A NORMAL ANGLE OF INCIDENCE, APPLIED
    TO BOTH FACES.
    TYPICAL ABSORPTION: 0.30% MAXIMUM.

    1Register for Pricing
    LX-0538-Z-AR more info...

    LX-0538-Z-AR

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 0.500″+.000″/-.005″
    EDGE THICKNESS: 0.062″+/-.005″
    WEDGE ERROR: 0.0006″ MAXIMUM T.I.R.
    SURFACE ACCURACY: 1/40 WAVE @ 10.6u, 2 FACES.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    FOCAL LENGTH: 3.750″ +/- 0.5%
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE.
    COATING: ANTIREFLECTIVE COATING FOR 0.25% MAXIMUM
    REFLECTANCE PER SURFACE AT 10.6 MICRONS
    WITH A NORMAL ANGLE OF INCIDENCE, APPLIED
    TO BOTH FACES.
    TYPICAL ABSORPTION: 0.30% MAXIMUM.

    4Register for Pricing
    LX-0550-Z-ET2.0-AR(9.2) more info...

    LX-0550-Z-ET2.0-AR(9.2)

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 0.500″+.000″/-.005″
    EDGE THICKNESS: 0.080″+/-.010″
    WEDGE ERROR: 0.0005″ MAXIMUM T.I.R.
    SURFACE ACCURACY: 1/40 WAVE @ 10.6u, 2 FACES.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    FOCAL LENGTH: 5.000″ +/- 0.5%
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE.
    COATING: ANTIREFLECTIVE COATING FOR 0.25% MAXIMUM
    REFLECTANCE PER SURFACE AT 9.20 MICRONS
    WITH A NORMAL ANGLE OF INCIDENCE, APPLIED
    TO BOTH FACES.
    TYPICAL ABSORPTION: 0.30% MAXIMUM.

    9Register for Pricing
    LX-0560-Z-ET2.0-AR(9.2) more info...

    LX-0560-Z-ET2.0-AR(9.2)

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 0.500″+.000″/-.005″
    EDGE THICKNESS: 0.080″+/-.005″
    WEDGE ERROR: 0.0005″ MAXIMUM T.I.R.
    SURFACE ACCURACY: 1/40 WAVE @ 10.6u, 2 FACES.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    FOCAL LENGTH: 6.000″ +/- 0.5%
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE
    COATING: ANTIREFLECTIVE COATING FOR 0.25% MAXIMUM
    REFLECTANCE PER SURFACE AT 9.20 MICRONS
    WITH A NORMAL ANGLE OF INCIDENCE, APPLIED
    TO BOTH FACES.

    6Register for Pricing
    LX-0638-Z-ET1.52-AR more info...

    LX-0638-Z-ET1.52-AR

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 0.600″+.000″/-.005″
    EDGE THICKNESS: 0.060″+/-.010″
    WEDGE ERROR: 0.0006″ MAXIMUM T.I.R.
    SURFACE ACCURACY: 1/40 WAVE @ 10.6u, 2 FACES.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    FOCAL LENGTH: 3.750″ +/- 1.0%
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE.
    COATING: ANTIREFLECTIVE COATING FOR 0.50% MAXIMUM
    REFLECTANCE PER SURFACE AT 10.6 MICRONS
    WITH A NORMAL ANGLE OF INCIDENCE, APPLIED
    TO BOTH FACES.
    TYPICAL ABSORPTION: 0.30% MAXIMUM.

    13Register for Pricing
    LX-0735-BK7-ET5.59-DBAR(Y/532) more info...

    LX-0735-BK7-ET5.59-DBAR(Y/532)

    CONFIGURATION: DISC, PLANO/CONVEX
    DIAMETER: 0.750″+.000″/-.005″
    CENTER THICKNESS: 0.256″REF.ONLY
    EDGE THICKNESS: 0.220″ +/-.005″
    EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
    SPHERICAL RADIUS: 1.838″+/-.090″ CONVEX.
    CENTERING ERROR: 3 ARC MINUTES MAXIMUM.
    CLEAR APERTURE: CENTRAL 0.675″MINIMUM DIAMETER.
    SURFACE FINISH: 60-40 OR BETTER, 2 FACES.
    SURFACE FIGURE: PLANO: POWER: 2 FRINGES MAXIMUM
    IRREG: 1 FRINGE MAXIMUM
    SPH.RAD: POWER: SEE RAD.TOLERANCE
    IRREG: 1 FRINGE MAXIMUM
    MARKING(S): ARROW ON OD SURFACE POINTING TOWARDS
    CONVEX FACE.
    MATERIAL TYPE/QUALITY: SCHOTT BK-7 GLASS, FINE
    ANNEALED, GRADE A.
    COATING: DUAL-BAND ANTIREFLECTIVE COATING FOR
    MAX.TRANS. AT 1.064um AND 0.532um.

    2Register for Pricing
    LX-07B3-FS-DBAR(Y/532) more info...

    LX-07B3-FS-DBAR(Y/532)

    CONFIGURATION: DISC, PLANO/CONVEX
    DIAMETER: 0.750″+.000″/-.005″
    CENTER THICKNESS: 0.105″+/-.005″
    EDGE THICKNESS: 0.098″ REFERENCE ONLY.
    EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
    SPHERICAL RADIUS: 10.483″+/- 0.105″ CONVEX
    CENTERING ERROR: 3 ARC MINUTES MAXIMUM.
    CLEAR APERTURE: CENTRAL 0.650 MINIMUM DIAMETER.
    SURFACE FINISH: 40-20 PER MIL-O-13830, 2 FACES.
    SURFACE ACCURACY: 1/2 FRINGE MAXIMUM AT 633nm,
    WITHIN CLEAR APERTURE, 2 FACES.
    MATERIAL TYPE/QUALITY: FUSED SILICA, ULTRAVIOLET
    GRADE.
    MARKING: ARROW LOCATED ON OD SURFACE POINTING
    TOWARDS CONVEX SURFACE.
    COATING: DUAL BAND ANTIREFLECTIVE COATED FOR 0.50%
    MAXIMUM REFLECTANCE PER SURFACE AT BOTH
    1.064um AND ALSO 0.532um WITH A NORMAL
    INCIDENCE ANGLE, APPLIED TO BOTH FACES.

    1Register for Pricing
    LX-1060-Z-ET3.0 more info...

    LX-1060-Z-ET3.0

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 1.000″+.000″/-.005″
    EDGE THICKNESS: 0.120″ +/-.005″
    WEDGE ERROR: 0.001″ MAXIMUM T.I.R.
    SURFACE ACCURACY: 1/40 WAVE @ 10.6um, 2 FACES.
    SURFACE QUALITY: 40-20 PER MIL-PRF-13830, 2 FACES.
    FOCAL LENGTH: 6.000″ +/- 0.50%
    MATERIAL TYPE/QUALITY: ZINC SELENIDE, LASER GRADE.
    COATING: ANTIREFLECTIVE COATING FOR 0.50% MAXIMUM
    REFLECTANCE PER SURFACE AT 10.6 MICRONS,
    WITH A NORMAL INCIDENCE ANGLE APPLIED
    TO BOTH FACES.
    TYPICAL ABSORPTION: 0.30% MAXIMUM

    7Register for Pricing
    LX-1150-Z-ET2.7-AR/0333-045-01 more info...

    LX-1150-Z-ET2.7-AR/0333-045-01

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 1.100″+.000″/-.005″
    EDGE THK: 0.1085″ REF. CTR.THK: 0.130″+/-.010″
    WEDGE ERROR: 0.001″ MAXIMUM T.I.R.
    SPHERICAL RADIUS: 7.015″+/-.035″ CONVEX.
    FOCAL LENGTH: 5.00″
    SURFACE FIGURE: 4 FRINGES MAXIMUM AT 0.633um
    WITHIN CLEAR APERTURE, 2 FACES.
    SURFACE QUALITY: 60-40 PER MIL-O-13830, 2 FACES.
    CLEAR APERTURE: CENTRAL 0.900″MINIMUM DIAMETER.
    EDGE BEVELS: 0.015″ NOMINAL X 45deg, 2 PLACES.
    EDGE CHIPS: 0.020″ MAXIMUM SIZE.
    MATERIAL TYPE/QUALITY: ZINC SELENIDE, OPTICAL
    GRADE.
    COATING: ANTIREFLECTIVE COATED FOR 0.50% MAXIMUM
    REFLECTANCE PER SURFACE AT 10.60 MICRONS
    WITH A NORMAL INCIDENCE ANGLE, APPLIED
    TO BOTH FACES.

    2Register for Pricing
    LX-11A0-FS-AR(Y) more info...

    LX-11A0-FS-AR(Y)

    CONFIGURATION: DISC, PLANO/CONVEX
    DIAMETER: 1.100″+.000″/-.005″
    CENTER THICKNESS: 0.154″+/-.005″
    EDGE THICKNESS: 0.120″ REFERENCE ONLY.
    EDGE BEVEL: LIGHT PROTECTIVE BEVEL, 2 PLACES.
    SPHERICAL RADIUS: 4.498″+/- 0.045″ CONVEX
    CENTERING ERROR: 3 ARC MINUTES MAXIMUM.
    CLEAR APERTURE: CENTRAL 0.990 MINIMUM DIAMETER.
    SURFACE FINISH: 40-20 PER MIL-O-13830, 2 FACES.
    SURFACE ACCURACY: 1/2 FRINGE MAXIMUM AT 633nm,
    WITHIN CLEAR APERTURE, 2 FACES.
    MATERIAL TYPE/QUALITY: FUSED SILICA, STANDARD
    OPTICAL GRADE.
    MARKING: ARROW LOCATED ON OD SURFACE POINTING
    TOWARDS CONVEX SURFACE.
    COATING: ANTIREFLECTIVE COATED FOR 0.25% MAXIMUM
    REFLECTANCE PER SURFACE AT 1.064um WITH
    A NORMAL INCIDENCE ANGLE, APPLIED TO
    BOTH FACES.

    1Register for Pricing
    LX-1535-Z-ET3.5 more info...

    LX-1535-Z-ET3.5

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 1.500″+.000″/-.005″
    EDGE THICKNESS: 0.140″+/-.010″
    WEDGE ERROR: 0.0015″MAXIMUM T.I.R.
    SURFACE ACCURACY: 1/40 WAVE @ 10.6u, 2 FACES.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    FOCAL LENGTH: 3.500″ +/- 1.0%
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE.
    COATING: ANTIREFLECTIVE COATING FOR 0.50% MAXIMUM
    REFLECTANCE PER SURFACE AT 10.6 MICRONS
    WITH A NORMAL INCIDENCE ANGLE, APPLIED
    TO BOTH FACES.
    TYPICAL ABSORPTION: 0.30% MAXIMUM.

    20Register for Pricing
    LX-1535-Z-ET5.0 more info...

    LX-1535-Z-ET5.0

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 1.500″+.000″/-.005″
    EDGE THICKNESS: 0.197″+/-.010″
    WEDGE ERROR: 0.002″MAXIMUM T.I.R.
    SURFACE ACCURACY: 1/40 WAVE @ 10.6u, 2 FACES.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    FOCAL LENGTH: 3.500″ +/- 2.5%
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE.
    COATING: ANTIREFLECTIVE COATING FOR 0.50% MAXIMUM
    REFLECTANCE PER SURFACE AT 10.6 MICRONS
    WITH A NORMAL INCIDENCE ANGLE, APPLIED
    TO BOTH FACES.
    TYPICAL ABSORPTION: 0.30% MAXIMUM.

    13Register for Pricing
    LX-1538-Z-ET2.0-AR / C01106 more info...

    LX-1538-Z-ET2.0-AR / C01106

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 1.500″+.000″/-.005″
    EDGE THK: 0.078″ REF. CTR.THK: 0.132″+/-.010″
    WEDGE ERROR: 0.0015″ MAXIMUM T.I.R.
    SPHERICAL CONVEX RADIUS: 5.250″+/- 8 FRINGES.
    FOCAL LENGTH: 3.7425″
    SURFACE FIGURE: 2 FRINGES MAXIMUM AT 0.633um
    WITHIN CLEAR APERTURE, 2 FACES.
    SURFACE QUALITY: 40-20 PER MIL-PRF-13830, 2 FACES.
    CLEAR APERTURE: CENTRAL 1.350″MINIMUM DIAMETER.
    EDGE BEVELS: 0.010″ MAXIMUM X 45deg, 2 PLACES.
    EDGE CHIPS: 0.020″ MAXIMUM SIZE.
    MATERIAL TYPE/QUALITY: ZINC SELENIDE, OPTICAL
    GRADE.
    COATING: ANTIREFLECTIVE COATED FOR 0.50% MAXIMUM
    REFLECTANCE PER SURFACE AT 10.60 MICRONS
    WITH A NORMAL INCIDENCE ANGLE, APPLIED
    TO BOTH FACES.

    10Register for Pricing
    LX-1550-Z-ET4.5 more info...

    LX-1550-Z-ET4.5

    CONFIGURATION: DISC, PLANO-CONVEX
    DIAMETER: 1.500″+.000″/-.005″
    EDGE THICKNESS: 0.180″+/-.010″
    WEDGE ERROR: 0.0015″ MAXIMUM T.I.R.
    SURFACE ACCURACY: 1/40 WAVE @ 10.6u, 2 FACES
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    FOCAL LENGTH: 5.000″ +/- 0.5%
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE.
    COATING: ANTIREFLECTIVE COATING FOR 0.50% MAXIMUM
    REFLECTANCE PER SURFACE AT 10.6 MICRONS
    WITH A NORMAL INCIDENCE ANGLE, APPLIED
    TO BOTH FACES.
    TYPICAL ABSORPTION: 0.30% MAXIMUM.

    37Register for Pricing
    LX-1560-Z-ET7.6 more info...

    LX-1560-Z-ET7.6

    CONFIGURATION: DISC, PLANO-CONVEX.
    DIAMETER: 1.500″+.000″/-.005″
    EDGE THICKNESS: 0.300″+/-.005″
    WEDGE ERROR: 0.0015″ MAXIMUM T.I.R.
    SURFACE ACCURACY: 1/40 WAVE @ 10.6u, 2 FACES.
    SURFACE QUALITY: 40-20 SCRATCH-DIG, 2 FACES.
    FOCAL LENGTH: 6.000″ +/- 0.5%
    MATERIAL TYPE/QUALITY: CVD ZnSe, LASER GRADE.
    COATING: ANTIREFLECTIVE COATING FOR 0.50% MAXIMUM
    REFLECTANCE PER SURFACE AT 10.6 MICRONS
    WITH A NORMAL INCIDENCE ANGLE, APPLIED
    TO BOTH FACES.
    TYPICAL ABSORPTION: 0.30% MAXIMUM.

    2Register for Pricing